Revitalizing two dresses

The first dress is one that my youngest sister gave me several years ago. I've been hauling it around since, but have never worn it: mandarin collars just don't look good on me. It's a very nice stretch velvet dress (Bought for my brother's wedding, when my sister was in her early teens. She's since grown at least 6 inches, while I haven't, so I got it.), and I wanted to somehow get some use out of it. So, I turned it into a skirt.
I cut off the bodice, made a casing for the elastic, inserted the elastic, and closed it all up. Quick and easy.
I wanted to add some sort of embellishment- if I could figure out how to do it, I'd use the silver embroidered collar pieces- so I took the 3 buttons from the bodice and sewed them along the edge of the slit in the skirt. A nice little touch of bling! I think I'll be wearing this skirt sometime in the near future.

The other dress is one my MIL gave LMS. I think one of her older cousins had worn it when they were younger. Personally, I think it's hideously out-dated. Luckily for me, the bodice was stained, which gave me just the excuse I needed to tweak it a bit.
I did the same thing with this dress that I did with the blue dress, and it turned out just as good. They were both fairly quick and easy to do, and extended the life of the dresses.
However, I'm still debating the lace on the hem. I'm not sure I love it, but I'm afraid the skirt might be too plain if I take the lace off. Any one else have an opinion? I'd love to hear it!

LMS likes it, and apparently it's a princess skirt- hence the fingers holding it up.
It's also a twirly skirt!

Cute skirt for Little Miss Sunshine

Awhile ago, I saw a cute microsuede skirt at Target, but couldn't quite justify buying it, despite it's cuteness.

Since there was quite a bit of fabric leftover from when I made my black embroidered microsuede fabric, I used some of it and some of the lining to make a skirt for LMS.

I used an existing skirt to make a pattern for the microsuede and lining,

then I used some netting to make a ruffle all around so it would be nice and fluffy. The skirt I saw at Target had a netting ruffle that extended past the hem of the skirt, but I kept my ruffle shorter than the hem.

I think it turned out quite well, and LMS likes it :)

Other sewing projects I've been working on

I've sewed several skirts over the last few weeks. I used the moss green corduroy skirt on the right that I bought at Sundance as my pattern.

The tannish one is the skirt I sewed first- too see if my idea of making a skirt using another as a pattern would work. Since it did, I then sewed the embroidered black skirt, followed by the embroidered purple skirt. The skirts are a simple A-line, with elastic in the back waistband. Doing it this way meant I didn't have to put zippers in. I can do it, but it takes time and is fiddly, I'm all about quick and easy. These skirts were fairly quick and easy to make- only taking a couple hours each.

I didn't line the tan cotton skirt, but the purple and black skirts are static-y microsuede, so I had to add a lining to them. That turned out to be a bit of a pain, but worth the effort.

I still need to make a paper pattern, and this spring I'll use it to make some light weight summer skirts.

Second attempt at repurposing clothing

This time I turned a shirt of mine into a jumper for LMS. I love the color of the shirt, but the cut was awful- it hung like a bag on me.

I intended to make it into a dress, but I wasn't quite thinking far enough ahead when I cut it out, so there ended up not being enough fabric in the right places for a dress. Because of that, I used the sleeves for the front and back bodice sections, the majority of the lower portion of the shirt for the skirt, and pieces of the shirt near the neckline for the straps and the ruffle.

I put a bit of a gather in the skirt, which I pinned to the bodice and then sewed together. I then added the straps (simple tubes sewn, then turned right side out) and the ruffle (sewed a seam down the center of the strip, pulled the threads to gather the fabric in, then sewed it to the waistband). I didn't have to worry about a bottom hem because I used the original hem of the shirt. I also used the hemmed edges of the sleeves for the upper portions of bodice, so again, I didn't have to do any hemming.

T-shirting is a bit of a pain to work with, but overall I'm happy with how the jumper turned out, even if it wasn't how I first envisioned it.

Twine letter gone awry

I saw a similar project here, and figured it wouldn't be too difficult to replicate. In theory it wasn't, but in actuality it was. An "S" is a lot harder to wrap than a "T", let me tell you. I eventually figured out a way to do it so it still looked nice.

It wasn't till I was looking at the picture on my computer that I noticed something off. Anyone else see it? I truly didn't realize it till then, either. Not while I was working on it, not while I was taking a picture...
Anyway, the other side looks like this:
not nearly as nice and even, and it looks a lot worse in person.

So I have to decide if I want to rip it all off and do the curves all over, or what. How motivated am I?

My first re-purposed clothing attempt

Awhile ago I found several blogs that talked about re-purposing clothing. They turned adult pants into child pants, an adult shirt into a girl's dress, and so on. At the time, I thought 'interesting idea, but I don't see myself doing this since I don't have that many clothes (hence none to spare for other projects), we live too far from thrift stores to make thrifting on a regular basis an economical way of doing things, and LMS doesn't really need more clothes'.

Fast forward a bit, and I was sorting my clothes, making room for winter clothing, and I found a few things I thought might work for re-purposing. The first is a pair of ancient yoga pants that are all stretched out and baggy on me.

I used this tutorial to get started.

I used a pair of pink stretchy pants to make a pattern and cut out pieces for a pair of black pants for LMS. I used the original hem for the hem of the new pants, meaning I only needed to put a waistband in after sewing the legs.

I wasn't too worried about how they turned out: the original pants are well past their expiration date in their current form, so being able to use them for something else is just a bonus. I don't intend for LMS to wear them anywhere, they're for playing outside without ruining her nicer clothes.

Overall, I think they turned out well, and I feel confident in trying more projects as the materials present themselves.

Hair clippy storage

LMS has tons of clippies- way more than she needs, but I can't bring myself to get rid of any of them, since she does wear them. Just some more often than others. In any case, I was tired of the ribbons hanging on the wall- there just wasn't enough space for all the clippies. So I decided to make a board to clip them to. I'd seen similar things on other blogs and figured it wouldn't be too hard to do.

It was pretty easy- the hardest part was getting the frame to look right. I took a black frame I got at Target and spray painted it an almond color. I decided I didn't like the off white color, so I then spray painted it white. I used some sand paper and a sanding block to sand some of the paint off and give it an 'aged' look. Despite the tons of layers, I think it turned out pretty good: white on top, the off white showing below that, with black below that.

I used spray adhesive to adhere a piece of drop cloth (yep, there's still some left!) to the glass. I wanted to use cardboard, but couldn't find a piece big enough. I hot glued the edges of the fabric to the back, then wrapped the ribbon around it all. Once I got the placement where I wanted it, I hot glued the ribbons to the cloth on the back and the glass. For added security (I'm not sure how long hot glue on glass will hold), I put straight pins through the ends of the ribbons and the cloth.

I put the fabric and ribbon covered glass back in the frame, put the backing in, and put the clippies on the ribbon. Now we have plenty of room for LMS's clippies, and it should match her room when we finally move (it'll be white, purple and green- I've been collecting the bedding for a year or so now, and I think I've got most of the pieces now).

Drop cloth stockings

I had some of the drop cloth fabric left, so I made stockings for us. We had a couple old knit ones for Mr. M and I, but LMS only had a tiny one that we bought for her first Christmas. This year, I decided it was time for new ones.

I used leftover fabric from the advent calendar for the stockings, and I used some of the yellow felt I bought for LMS's Princess Aurora crown. I also used yellow buttons I had sitting around from another project. So, I managed to make these stockings without spending a dime!

I dry stenciled names and used embroidery floss for accent stitching. I glued the stars and name pieces, then sewed them down, just like I did with the advent calendar. The stockings ended up matching the advent calendar, but I don't think that's a bad thing. They're also nice and big, with plenty of room for whatever we decide to put in them.

The only thing I would do different is to put a lining in- I forgot to do it till I was almost done, and at that point I wasn't going to take everything apart and start over. Although, now that I'm thinking about it, I could make a liner, put it in the stocking, and just hand stitch it in place at the seam where the cuff joins the stocking. I have some lightweight cotton fabric I could use...

More pipe cleaner ornaments

I used the tutorial here to make some pipe cleaner ornaments to give to the ladies I visit teach. I wanted to do some washer ornaments like the ones I saw here, but I just couldn't get them to work out right.

(In going back and reading the instructions, it appears that where I went wrong was in trying to do them inside- you need to do them on a concrete floor apparently. However, it's been hovering around zero degrees, so that's not going to happen till it warms up. Though I just remembered- the basement has a cement floor- maybe there's hope for this project after all.)

While I'm happy with how the snowflakes turned out, I liked the washer ornaments a lot better. Oh well.

Since I needed to make something with materials I already had on hand, I went with the pipe cleaners. They were pretty easy to make and didn't take too long, either. I made 4 sets of 3 while watching a movie, and it didn't take the whole length of the movie to finish them.

Drop cloth Advent calendar

Saturday I finally finished the advent calendar I've been working on all week. Half way through, I considered scrapping the whole thing because it turned out to be way more work than I thought it would be, but I'm glad I didn't. I really like how it turned out.

I used two dropcloths I had bought for another project before I changed my mind about the fabric I wanted to use. So they were just sitting in my craft cupboard, begging to be used for something. The only problem (and it turned out to be a big one) was that the drop cloths had a 'leak proof lining'. I thought that meant there was a rubberized banking. Not so much. A leak proof lining is thin plastic (slightly thicker than plastic wrap) attached to the fabric. I washed the drop cloths a couple times to soften them up and that helped loosen the plastic in some places. I started pulling off what I could, but it was very tedious and messy. I eventually called it quits and moved on with the project.

I used one cloth to cut out the squares for the pockets. I used the hemmed edges of the cloth for the top edges, eliminating the need for me to hem them. After I cut them out, I tossed them in the washer for a quick rinse cycle and then dried them. They came out nicely frayed, I just had to trim and even everything up.

I don't own a Cricut (unfortunately), so had to make my number stencils by hand. I printed out some numbers, taped the paper to a sheet of black craft foam, and cut them out with an exacto knife. I then dry brushed the numbers 1-25 on the squares with acrylic paint left over from another project. They dried quickly, and I ironed them to heat set, just to make sure.

I used Aleene's Fast Grab Tacky Glue to glue the squares in place, and let them dry over night. I would use actual fabric glue if I were to do it again, as the glue came unstuck in some places.

I had planned on machine sewing with white thread each square, but the whole thing was just way too plain and boring. So I used some red embroidery floss and did a running stitch around 3 sides of each square. I then added some little bows from a roll of three kinds of ribbon that I found at Michaels awhile ago and bought, not knowing what I was going to use it for. If I did it again, I would sew the bows on before gluing and sewing the squares to the back, though, since sewing the bows on helped loosen the glue even more.

Somewhere in there, I spent more time picking plastic off the back, making my finger tips very sore, and delaying the whole process.

After the red thread and bows, I put tiny dabs of hot glue at the top corners of each square to make sure they didn't get pulled off too easily. I also dabbed tiny dabs of glue to the bows to make sure they wouldn't come undone.


I tried sewing some red buttons on, but they just made things look busy. I like how simple it looks, so I pulled them back off.
I made the pocket for Christmas day bigger than the others, with a bigger bow. I also put a candy cane in, instead of a mini candy bar.

After all that, I made a star out of some of the yellow felt left over from LMS's princess crown and angel belt. I used lighter yellow embroidery thread on the edges, and sewed a button in the middle.
After taking out the candy for the day, the star goes in the pocket to mark the date. The pockets can hold papers, multiple candies, etc, so they're quite versatile.

After all that, I sewed a second piece of fabric to the back and some tabs on the top to hang it from. I ironed it all, and in this case, the plastic did come in handy: it acted like a bonding agent. I hemmed the bottom, and hung it from a dowel. I added some braided twine to hang it from.
It looks kind of plain on the wall right now, so I think next year, when it's hanging on our own wall, I'll have some greenery and bells just above it.

Quick and easy felt hair clips

The other day, while I was wandering through the Christmas aisles at wally world, I found these ornaments. They had green, red, grey, blue, and gold/yellow. I thought they would make some quick and easy hair clips, but I didn't particularly like all the colors, so I just grabbed a package of green flowers and a package of red ones.

I cut the tip off the petal that had a hole. I then used my glue gun to carefully glue two flowers together, making sure the cut tips were on the bottom. This is what the back side looked like:
The front side (can't even tell there used to be some holes):I then glued the two flowers to a clippy that I had already covered with ribbon. I now have some Christmas-y clippies that took maybe ten minutes to make, and were super cheap.

More hair clips

When I made the felt flower clips, I also made some other clips for LMS.

Top row: Gingerbread man buttons on white grosgrain ribbon, White chenille flowers (wedding/baby ribbon section of wally world) on white grosgrain ribbon, Brown chenille flowers (same place as the white ones) on brown satin ribbon (I wanted brown velour ribbon to match one of LMS's dresses, but I haven't found any yet).
Bottom row: White velour ribbon bows on white grosgrain ribbon, Ladybug made of red and black grosgrain ribbon on black grosgrain ribbon with black grosgrain ribbon accents, Brown polka dotted blue grosgrain ribbon with brown satin ribbon accent on brown satin ribbon.

They didn't take too long to make- it takes me longer to figure out what I want to do with each one than it does to put them together.

Pipe cleaner snowflakes

found a super quick and easy snowflake craft here, and LMS and I knocked out a couple in about 10 minutes.

I cut the pipe cleaners in half and twisted one around them, and LMS started threading clear tri beads on them. Mine went a lot quicker, but I have better hand-eye coordination than she does. It was good practice for her.

All done! Hers is the one on the right with the bent pieces. I straightened them out and we'll set them on tree branches once my parents get their tree put up.

Our ward Christmas activity & an easy angel dress

Our ward Christmas activity was last night. Early in the month and on a weeknight is a bit different, but we had a great turn out. Most of the families have kids who have to be there anyway, so it worked out well.

We had a 'Night in Bethlehem' theme- everyone brought a can or two of food to pay the 'tax'. Everyone was supposed to wear period clothing- so there were a lot of bathrobes and draped fabric. The kids were supposed to come dressed as angels. Mr. M and my brother (the biggest guys in the ward) were Roman centurions.

I made an angel dress for LMS for our ward Christmas activity- it was pretty quick and easy. I got a $4 twin flat sheet from wally world and folded it in half. Folded with the long sides together, the long sides formed the bottom hems on the front and back. It only ended up being a tiny bit too long- but the belt solved that problem. I laid LMS on top of the folded in half sheet and cut out the shape I wanted on one side. After she got up, I folded it in half again and cut the other side out so both sides matched (see below). Once it was cut out, I just sewed up both side seams and sleeves, hemmed the sleeves, and used some white binding I had left over from another project to bind the neckline.

I then used some felt and some gold fabric (both left over from her Sleeping Beauty crown) to make a belt. I sewed on some velcro I had leftover from another project so the belt can be easily taken on and off.Total cost: about $1.50

I only used about a third of the sheet, and will use the rest of it for a doctor jacket and a chef hat for her to dress up in.

At one point, LMS told me she needed wings.

"Angels don't have wings"

"Yes, they do. Angels need wings to fly."

"No they don't, angels fly without wings."

She showed me the angel from her Fisher Price Little People Nativity.

"See- she has wings."

How to answer that?

"Yes, but when you become an angel, you won't need wings to fly."

She wasn't convinced.

Luckily, she forgot about it and didn't bring it up again. Though she did try to convince me that angels don't wear shoes. Not sure wear she got that idea. Since it was quite cold outside, I managed to convince her to keep them on.

A bad picture of the kids up front during a song that everyone sang. It was dark in the room, so the quality isn't good, and everyone has evil eyes. LMS is standing next to one of her friends from nursery.

At the very end, Santa came to visit. LMS was quite excited. She's really getting into the whole Christmas thing this year- Santa, the lights, etc. I'm going to have her help me wrap the presents so we can talk about giving presents.